V-Rings

The V-Ring is an elastomer axial seal for shaft bearings. It seals axially against a conterface. Thas type of seal has been used widely for several applications and has proven to be reliable and effective against dust, dirt, water, oil splash and other media.

The ring consists of three parts:

a - The seal body, installed to connect with the shaft

b - The hinge, acting as a spring connection between the body and the lip

c - The conical self-adjusting lip which provides the actual dynamic sealing against the counterface

The counterface can be outside the bearing cap, a washer or any suitable metal pressing.

Materials

- NBR black, -40 up to +120°C in oil / +90°C in water

- FKM brown, -30 bis +200°C

Standard Seal Types

 Type VA

Is the most common profile. It has a perpendicular rear face. Wide range of sizes, from 3 to 2000 mm shafts.

 Type VS

Has wide body to ensure higher radial force than VA type. Range of sizes from 5 to 200mm shafts.


Contact

CIMAKA Int'l GmbH

Seebacherstrasse 56
CH - 8052 Zürich

VAT CHE-105.153.479

GPS Koordinaten
N 47.423139
E 8.543441

Tel. +41 44 942 47 53
Fax +41 44 942 47 54